liquid immersion cooling system
$1,399.00 - $1,499.00
SCROLL DOWN FOR BULK PRICING
Minimum order quantity is 5 rigs for X8ULTRA+
- Miners Supported 2x MicroBT Whatsminer or 1x Antminer
- Input Power 180-277 VAC
- Maximum Input Current 60A (MAX COOLING CAPACITY 12KW )
- Networking RJ45 Port (POSSIBLE TO UPGRADE TO WIFI)
- Security LOCKABLE TOP (SPECIAL BOLT KEY)
- Operating Min/Max Temp -30C TO +40C / -22f TO 104f
- External Dimensions 40x40x120CM / 15.7 X 15.7 x 47.2IN / 85KG
- Additional Features IP54 WEATHERPROOF. SAFE TO USE ALL YEAR ROUND
- Internal Tank Dimensions
321 x 244 x 580 mm
12.6 in x 9.6 in x 22.8 in
SHIPPING AND TARIFFS MAY APPLY TO EACH UNIT ORDERD
SUPPORTS 2X MICROBIT WHATSMINER ASIC
OR SINGLE BITMAIN ANTMINER ASIC
Octotank all in one immersion cooling system supports up to 2 MicroBT Whatsminer ASIC miners or 1 Bitmain Antminer ASIC.
- Octotank12 12kw all in one home immersion mining system
- 35l immersion fluid
- Lifting straps to help carry the unit up stairs
- 2x dispersion plates for different miners
- Extra wheels (both leg stands and wheels included)
Individual relays on
all ac inputs
Designed with electrical safety in mind. All of the individual outlets have relays for safety shut off.
Our unique sensor array helps avoid critical hardware failure.
30A PER MINER
We have used 2x double pole 30A breakers as the input connection.
COMPATIBLE WITH BOTH
HOT AND COLD WEATHER
Our unit is designed with all year use in mind. Weatherproof and safe to use outdoors.
FULL PLUG AND
Just drop in your ASIC miners, hook up the cables and
enjoy the added benefit of immersion cooling.
Powder coated steel with a satin white finish.
Perfect fit with any home interior. An easy fit for
the garden or garage as well.
INTEGRATED OLED SCREEN
AND TOUCH PANEL
An IP54 rating means that the system will be protected against contamination from limited amounts of dust and other particles. Additionally, you can be confident that it will be protected from water sprays from all directions.
Our system has a waterproof gasket around the transparent high-strength polycarbonate lid that creates a waterproof seal. At the inside of our system, all the electronics are sealed in IP54 rated enclosures.
CAN WITHSTAND HEAVY RAIN ,
SNOW AND EXTREME WEATHER
Our system has been designed with a cooling unit that can handle up to 12KW of heat.
This allows for our system fans to run at very low speed which allows for quiet operation.
FAN MAX RPM: 1700
FAN MIN RPM:400
FAN OPERATING VOLTAGE: 180-277V
FAN NOISE MAX RPM: 57dBA
FAN NOISE QUIET PROFILE: 30dBA
Integrated smart lighting
System is switched on and running. All systems are working optimally.
System is switched on but temperature is above norm.
System is switched on but has an error and all AC power to the ASICs has been cut.
Possible to adjust light tone settings in the menu.
Additional available colors: GREEN, WHITE
smart control system
AUTOMATIC REGULATION FOR THE BEST EFFICIENCY
- Auto shutoff on over temperature
- Auto shutoff for low fluid level
- Automatic flow rate control for optimal cooling
- Auto shutoff on over current
- Auto shutoff on fan fail
*control board mounted inside weatherproof casing under the rear access panel.
FOR USA, EU AND REST OF WORLD:
Our system has 2x30A dual pole breakers installed. Input power cable will be
installed to it. Please choose the correct cable in checkout.
2x US 4 PRONG DRYER PLUG
NEMA 14-30 - 60 AMPERS
Standard US 4 pole dryer plug. 2 cables for maximum power. Single cable can handle a maximum of 7200W which is enough for most use cases.
4x EU Schuko (Type F, CEE 7/4 plug) - 64 AMPERS
Standard European cables. Connect up to 4 cables depending on the ASIC models you are using. A single cable can handle up to 3840W. Recommended 2 cables for optimal connection.
REST OF THE WORLD CUSTOM
Please let us know what kind of cable you need if you are from other regions. We can provide any kind of custom cables on request.
global support and
spare parts network
Spare parts warehouses in Wyoming and Illinois. Dedicated support staff members available Monday-Saturday 9AM-6PM ET.
Spare parts warehouses in Estonia. Dedicated support staff members availa- ble Monday-Saturday 9AM-6PM CET. Engineering team in Mannheim, Germany.
Main manufacturing plant and second engineering team. Several production facilities.